Junction stiffness analysis and vibration noise prediction of wind power speed-increase gearbox

In order to study the vibration characteristics and radiation noise of wind power speed-increase gearbox, a torsional vibration model of wind power speed-increase gearbox is established based on the analysis of supporting stiffness of bearing and contact stiffness of gear pairs. By solving the vibration differential equation with the help of Matlab, the frequency and corresponding vibration mode are obtained. With taking stiffness excitation, error exaction and meshing impact exaction into account, the dynamic finite element model of speed-increase gearbox is set up, and the dynamic response simulation is carried out. Regarding vibration displacement of the nodes on gearbox surface as boundary condition, an acoustic boundary element model of speed-increase gearbox is built. The surface acoustic pressure of gearbox and the radiation noise of field points are solved by the direct boundary element method. The results show that there is a great difference between torsion frequency and excitation frequency of wind power speed-increase gearbox, and so the resonance doesn't occur. The maximum structural noise and radiation noise mainly appear near the double octave of the gears meshing frequency of high-speed grade.     

基于隧道式发酵金针菇菌渣的双孢蘑菇培养料制备分析

采用隧道发酵技术,以金针菇(Flammulina filiformis)菌渣为原材料,进行双孢蘑菇培养料的制备。通过一次及二次隧道发酵的工艺控制,检测堆制过程中温度、含水量、pH及电导率等理化成分的变化,并结合出菇结果评价金针菇菌渣培养料的使用情况。结果表明,金针菇菌渣在隧道一次发酵过程中最高温可达74℃以上,整个发酵周期16 d。通过隧道发酵制备的二次培养料不黏腻、结构松散、味道清香,含水量为66.40%,pH为8.16,电导率为875.00μs·cm-1,含氮量2.00%,碳氮比为20.36,符合双孢蘑菇栽培要求。双孢蘑菇四潮出菇产量为19.25 kg·m-2。表明隧道式发酵技术可以应用于工厂化金针菇菌渣制备的双孢蘑菇培养料中。     

Approaches to enhance power density of gearboxes for wind turbines

Based on pitting strength, some approaches to enhance power density of gearboxes for wind turbines are discussed. The calculation load is greatly reduced by power division. Allowable stress numbers are effectively increased by improving property of quality materials, precision heat treatment or shot peening. Load capacities can be also obviously enhanced by improving the tooth shape of morphology optimization of tooth root, tooth correction or superfinishing of tooth surface. The center distance is effectively decreased by minishing minimum allowable safety factor or enlarging face width. The power density of gearbox can be further improved by means of structure optimization of planet carrier or uniform load of planetary gear transmission.     

The analysis of China wind power industry

The development course of China wind power industry is reviewed by six stages. National policies on wind power industry are elaborated from the aspects of laws & regulations, planning, finance & taxation and electrovalence policy. And these policies have played an important supporting and regulating role in the development of wind power industry. The development status of China wind power industry is analyzed based on wind turbine installed capacity, wind power output and their growth rate. It is explained that national wind turbine manufacturers have kept developing and become strong by the data of new global installed capacity share of mainland wind turbine manufacturers in 2013 and the new global market share of 8 domestic enterprises among the world top 15 wind turbine manufacturers. But there are still 5 key problems which influence the development of national wind turbine need to be solved, including lack of top-level design, abandon and restriction wind power seriously, lack of R&D abilities, some of the key parts relying on imports and wind turbine facing a quality guarantee dilemma. Taking Sinovel Wind Group Co. Ltd. and Xinjiang Goldwind Sci & Tech Co. Ltd., the two leading companies as an example, their performance is analyzed and it’s pointed out that the wind industry must keep vigilant after the overspeed development. The enterprises should try to avoid neglecting cultivating their inner core competitive ability, including technology advancements and products reliability. Occupying the market with low price competition and expanding blindly is also not desirable. At last, the development prospects of our country’s wind power industry are analyzed and three proposals are put forward.     

Vibration Analysis and System Simulation for a Stalled Wind Turbine

The aerodynamic characteristic of wind turbine is calculated by applying the Blade Element Momentum(BEM) theory.Also finite element mode analysis is done for the tower and the rotor.Then the multi-dynamic model of the wind turbine is built in Adams.Also the drive chain is calculated by applying state space method and programmed in Matlab/ Simulink.With that the combined simulation of vibration characteristics is carried out on the base of MATLAB/Simulink and ADAMS,in which the transmission effects and aero-elasticity coupling is fully considered.The results show that the method is able to simulate the vibration characteristic almost the same as software Bladed,which is well-known for analyzing performance and loads for the design and certification of wind turbines.     

AN APPRONTMATE CALCULATING METHOD FOR WALL PLATES OF MAN'' S DRY GAS HOLDERS

The basic equations of wall plates of MAN' S dry gas holders are derived in this paper. According to the law of cylindrical bending given by the finite element results .we derive some approximate formula calculating the deflection and stresses of the wall plates from the basic equations. Compared with the known approximate calculating method.the method car. obviously increase the percision.     

Full Aero-elastic Bridge Model Design of Long Span Arch Bridge

Aero-elastic model design is the precondition of full bridge aero-elastic model tunnel tests. The full aero-elastic bridge model design of long span arch bridge is discussed. The effect on the model design of different transverse rod space and bend stiff is analyzed in detail. Different scheme need to be designed according to the transverse rod stiff. Considering the changing section dimensional arches, the method of projecting the spatial arches to the plane arches, then designing the plane arches, at last projecting the plane arches to the spatial arches is proposed at first. The results show that the method is effective.     

棉花分子育种研究进展

本文主要综述了我国近２０年来棉花分子育种在理论基础、技术方法、育种机理以及新品种培育等方面研究取得的成就及新进展，并讨论了棉花分子育种的发展方向     

STATIC ANALYSIS OF THE BODY OF MAN''S DRY GAS HOLDER WITH A VOLUME OF 120000m~3

This paper presents finite element calculations of the body of MAN'S dry gas holders with a volume of 120000m~3 under internal pressure and wind load. The analyses of displacements and internal forces of the body are presented. The control points of strength and rigidity check are determined. The work in this paper is very valuable to body's design.